国产熟女一区二区三区五月婷,中文亚洲av片不卡在线观看,亚洲精品国产suv一区88,亚洲成av人片在线观看www

Welcome to the official website of Dalian wanderrui Import & Export Co., Ltd!

National consultation hotline

0411-66886100

Your current location : home >> News >> Company news

About the manufacturing process of mobile phone case

Date of issue:2021-03-19 00:00 Source:http://hychibao.com Click:

The pores distributed in groups are formed by the chemical reaction between some components in the molten metal or between the molten metal and the core on the surface. The needle shaped or waist round reaction pores on the surface of castings are called surface needle holes and subcutaneous pores, which are caused by the interface reaction between molten metal and mold and core coating. The needle reaction pores scattered or distributed in groups on the whole section of the casting or in a local area.


Because the furnace charge is wet, rusty, greasy and humid, the smelting tools and ladle are not dried, the composition of the molten metal is improper, and the refining of the alloy liquid is insufficient, the molten metal contains a large amount of gas or gaseous substances, resulting in the precipitation of air holes or reaction air holes in the casting. Dalian motor housing


The core is not fully dried, with poor air permeability, poor ventilation, too much moisture and gas generating substances, the coating is not dried or contains too much gas generating components, the chill and core support have rust spots, oil stains or are not dried, and the metal mold exhaust is poor, forming intrusive pores in the casting.


The pouring system is unreasonable, the pouring and mold filling speed is too fast, and the exhaust of the metal mold is poor, which causes the metal liquid to generate turbulence, eddy current or cut-off during the pouring and mold filling process, resulting in gas entrainment, forming entrainment pores in the casting, and the alloy liquid is easy to inhale. Effective refining, protection and purification measures are not taken during the smelting and pouring process, resulting in a large amount of gas, slag and gas entrainment in the metal liquid, Precipitation pores and reaction pores are formed during mold filling and solidification.

The pores distributed in groups are formed by the chemical reaction between some components in the molten metal or between the molten metal and the core on the surface. The needle shaped or waist round reaction pores on the surface of castings are called surface needle holes and subcutaneous pores, which are caused by the interface reaction between molten metal and mold and core coating. The needle reaction pores scattered or distributed in groups on the whole section of the casting or in a local area.


Because the furnace charge is wet, rusty, greasy and humid, the smelting tools and ladle are not dried, the composition of the molten metal is improper, and the refining of the alloy liquid is insufficient, the molten metal contains a large amount of gas or gaseous substances, resulting in the precipitation of air holes or reaction air holes in the casting. Dalian motor housing


The core is not fully dried, with poor air permeability, poor ventilation, too much moisture and gas generating substances, the coating is not dried or contains too much gas generating components, the chill and core support have rust spots, oil stains or are not dried, and the metal mold exhaust is poor, forming intrusive pores in the casting.


The pouring system is unreasonable, the pouring and mold filling speed is too fast, and the exhaust of the metal mold is poor, which causes the metal liquid to generate turbulence, eddy current or cut-off during the pouring and mold filling process, resulting in gas entrainment, forming entrainment pores in the casting, and the alloy liquid is easy to inhale. Effective refining, protection and purification measures are not taken during the smelting and pouring process, resulting in a large amount of gas, slag and gas entrainment in the metal liquid, Precipitation pores and reaction pores are formed during mold filling and solidification.



Relevant labels:

Recent browsing:

Related products:

Related news:

大連船用零部件

Scan and pay attention to us

National consultation hotline:

0411-66886100

Q Q:52410155

Mailbox:wangdewen@wanderui.com

          zhuxingguang@wanderui.com

Address:No. 730, Southwest Road, Shahekou District, Dalian

Dalian wanderrui Import & Export Co., Ltd版權所有  Specializing in大連鑄造件,大連船用零部件,大連電機殼  遼ICP備16001801號
Powered by Clouds platform  Technical Support:聯(lián)企時代
Main business area: 大連 沈陽 鞍山 撫順 本溪 丹東 錦州 營口 阜新 遼陽
Online Service
share
体验区试看120秒啪啪免费| 欧美人做人爱a全程免费| 女人做爰高潮呻吟17分钟| 国产丝袜美女一区二区三区| 国产网红主播无码精品| 妺妺窝人体色WWW看美女| 狠狠色综合网站久久久久久久| 国产白嫩美女在线观看| 亚洲欧美乱综合图片区小说区| 亚洲学生妹高清av| 东京热男人av天堂| 日韩欧美人妻一区二区三区| 国产精品99久久久久久猫咪| 色偷偷色噜噜狠狠网站30根| 中文字幕乱码无码人妻系列蜜桃 | 亚洲色欲AV无码成人专区| 牲欲强的熟妇农村老妇女视频| 天天爽天天爽夜夜爽毛片| 亚洲精品久久久久久久蜜桃臀| 亚洲高清一区二区三区电影| 99热在线观看| 人妻丝袜av先锋影音先| 日韩无人区码卡二卡1卡2卡网站| 久久久久久久久久久精品| 日韩人妻无码精品无码中文字幕 | 国产v亚洲v天堂无码| 99久久国产综合精品麻豆| 上司部长出轨漂亮人妻| 婷婷网亚洲色偷偷男人的天堂| 免 费 黄 色 网 站 成 人| 久久青草精品38国产| 性生生活20分钟免费| 日本丰满熟妇videossex8k | 人妻少妇伦在线无码| 香港午夜三级A三级三点| 国产精品最新免费视频| 免费无码肉片在线观看| 人成午夜大片免费视频| 久久夜色精品国产亚洲av| 亚洲日韩av一区二区三区四区| 欧美性xxxx极品少妇|